Please note that all kits and conversions listed here are in 1:35 scale.
This page was last updated on
Saturday, 03-Jun-2023 15:08:58 MST.
Main gun without thermal cover
-
Accurate Armour
B35009
- cast resin
- very nicely detailed
-
Leopard Workshop LW019N
-
Model Point 3558
- turned aluminum with rifled bore
-
RB 35B100
- originally intended for use with a Ti-67 as an M68 105mm barrel, but
perfectly suited for an early Leopard
- turned aluminum barrel with rifled bore, turned brass parts and photo etch
parts for the bore evacuator
-
Perfect Scale Modellbau
35108
- L7A3 main gun barrel without thermal sleeve
- cast resin, one piece
-
Tamiya
- the Type 74 'Winter' kit includes a very good naked barrel and a new one with
Japanese thermal cover
Main gun with thermal cover
-
3D Micro Cosmos
MC-35-510
- Designed for use with the Meng 1A3/1A4 TS-007
- main gun with thermal sleeve without MRS colimator
-
3D Micro Cosmos
MC-35-511
- Designed for use with the Meng 1A5 TS-015
- maing gun with thermal sleeve with late MRS colimator
-
Leopard Workshop LW019AC
- Australian/Canadian thermal sleeve (the Aussies and Canucks replaced the original German straps
with automotive hose clamps)
- contains a turned aluminum barrel with rifling and cast resin thermal sleeve, bore evacuator
and muzzle bits
- contains a muzzle counter-weight and a MRS collimator (for use on a Canadian Leopard C2)
- a review may be found
posted on MSC Review Connect
- available for sale at Modellbau Koenig
-
Leopard Workshop
LW019E
- European thermal sleeve (having the original German straps)
- contains a turned aluminum barrel with rifling and cast resin thermal sleeve, bore evacuator
and muzzle bits
- contains a muzzle counter-weight and both an early and a late MRS collimator
- a review may be found
posted on MSC Review Connect
- available for sale at Modellbau Koenig
-
Model Point 3558-1
- turned aluminum with rifled bore
- does not include the thermal sleeve clamps (these will need to be added from a photo-etch set or scratch built)
-
Orange Hobby G35-138
- intended for use with the Meng 1A3/A4 (TS-007) kit
- a cast main gun barrel thermal sleeve and bore evacuator cast over a turned brass core
- includes PE parts for the thermal sleeve clamps
-
Panzer Art
GB35-103
- not sure which kit it is intended to be used with
- includes MRS of indeterminate type (it doesn't look like any in-service MRS I'm familiar with)
-
Perfect Scale Modellbau
35021
- a cast resin main gun barrel, complete with all sleeve clamps and straps
- intended as a replacement for the Italeri or Revell Leopard 1 kits
- cast with a metal rod inside to eliminate warping
-
Perfect Scale Modellbau
A1003
- Leopard 1 L7 gun barrel with thermal sleeve (no muzzle reference colimator)
- a CAD designed and 3D printed main gun barrel
-
Perfect Scale Modellbau
A1004
- Leopard 1 L7 gun barrel with thermal sleeve and Zeiss muzzle reference colimator
- a CAD designed and 3D printed main gun barrel
-
Perfect Scale Modellbau
A1006
- Leopard 1 L7 gun barrel with thermal sleeve and 'early' muzzle reference colimator
- a CAD designed and 3D printed main gun barrel
-
Voyager VBS0182
- L7A3 gun barrel (with thermal cover) and smoke dischargers
- intended for use with a 1A3 or 1A4 as no muzzle reference collimator is included
- includes a multi-part turned Al main gun barrel
- several photo-etch frets are included to provide the main gun thermal cover clamps and details
for the Wegmann 76mm smoke dischargers
-
Voyager VBS0186
- L7A3 gun barrel (with thermal cover) and smoke dischargers, designed for use with the
Takom C2 MEXAS (2003) (includes a muzzle reference collimator)
- this barrel would be equally useful on the Takom C2/1A5 (2004)
- includes a multi-part turned Al main gun barrel with a muzzle reference collimator
- several photo-etch frets are included to provide the main gun thermal cover clamps and details
for the Wegmann 76mm smoke dischargers
MG3
-
3D Micro Cosmos
MC-35-420/21
- 3D printed MG3s, one with and one without the bipod
-
CMK
P35008
- 3D printed MG3s, one with a butstock and one without
-
FC Model Trend
35515
- the set contains two 3D printed MG3s, one with and one without the butt stock
- suitable for use with any Leopard 1 (likely with some modification required to the kit mounting cradle)
-
Miniature Art Productions
MA-001
- MG3 mount set
- 3D printed parts, the set consists of the mount, bogey/roller unit, travel lock and two types of ammo boxes
- pairs nicely with the SSR Models MG3
- Miniature Art Productions doesn't have a website but they do have a
Facebook page
- a German review of the set may be found at
military modelling.info
-
Perfect Scale Modellbau
35032
- a cast resin set consisting of 2 MG3s and mounts complete with the skate ringe base
- suitable for use with any Leopard 1
-
Perfect Scale Modellbau
35165
- cast resin MG3 with PE parts for the Fliegerabwehrvisier (AA sight)
- new tool for 2017
- the set contains 2 MG3s
-
Perfect Scale Modellbau
PE011
- MG3 Fliegerabwehrvisier
- a photo etch set consisting of 8 complete Fliegerabwehrvisier which may be used with any
1:35 MG3
- SSR Models MG3
- an exquisite looking 3D printed MG3
- SSR doesn't have a website - they have a
Facebook page
- the set may be purchased from:
GPMG (FN-MAG)
The GPMG and mount is appropriate for use with a Canadian, Dutch or Belgian Leopards.
It should also be noted that Chile, Brazil and Greece also mount the GPMG
as those nations have purchased former NL and BE vehicles.
-
3D Micro Cosmos
MC-35-414
- FN-MAG
- the set contains 2 guns, one with and one without a [folded] bipod
-
Leopard Workshop
LW047
- Leopard Turret Top FN MAG/C6 Machine Gun
- cast resin C6 GPMG, mount and ammo can
- available for sale at Modellbau Koenig
-
Miniature Art Productions
MA-002
- FN MAG mount
- a 3D printed set consisting of the mount, travel lock, bogey/roller base,
KMW ammo box bracket and lid (one empty and one with an ammo can), and a
Canadian modified .50 cal ammo box (with lid)
- Miniature Art Productions doesn't have a website but they do have a
Facebook page
-
Perfect Scale Modellbau
A1001
- FN MAG/C6 GPMG and mount
- CAD Design & 3D print Parts & 1 Resin Part
- the set includes both the KMW 7.62 bested ammo tin bracked and the Canadian modified .50 cal ammo tin